JVC VR-N900U Startup Manual

Also see for VR-N900U: Instructions Instructions Instructions Instructions Startup guide

OthersE-26TroubleshootingSolutions to warning indicator light upProblem SolutionPower cannot be turned on. Check that the power cable has been plugged in correctly.Check that the power switch on the rear panel is switched on.Camera is not automatically detected. Follow the instructions in the camera’s user manual and check the DHCPsettings.Unable to operate the system by pressing the[REC] or [PLAY] button.Check that operation lock is not engaged.No images are recorded with recording controlmode.Check the settings in the [Camera Record Setting].Check that the scheduler is set to online.Check that the camera is in recording control mode.Unable to play back sound. Check that audio for the camera device is set to [Enable] in the [Camera RecordSetting] window.Error message Possible cause and solutionWARNING: HDD 0 (1) The HDD seems to be no longer serviceable.Replacement is recommended.Consult to your nearest JVC dealer.OVERHEATED! Check the temperature of the operating environment.Check that the fan unit operates properly.If the temperature of the operating environment is appropriate, consult toyour nearest JVC dealer.ENCODER ERROR(format) Abnormality with the input signal.Check the entered image signal.ENCODER ERROR (xxx) Other abnormality.Consult to your nearest JVC dealer.FAN STOP Fan abnormality. Check that the fan is rotating.CAUTIONBecause it will cause the breakdown, please discontinue operating whenthe fan does not rotate.Consult to your nearest JVC dealer.