JVC VN-T216VPRU Quick Manual

Also see for VN-T216VPRU: Specifications Specifications Instructions Instructions Instructions

Contents

5Adjusting the Camera PositionThe dome camera has three axes for positioning the camera. While monitoring the picture on themonitor, adjus t the camera position as follows:• Pan Adjustment (A) For Wall Mount and Tilted Ceilings Rotate the lens base(maximum360° ) until you are satisfied with the field of view.• Horizontal Rotation (B) Rotate 3D assembly in the base. Do not turn assembly more than360° as this assembly may cause the internal cables to twist and disconnect or break.• Tilt Adjustment (C) After loosening the thumbnuts, position the camera as desired, thenfinger –tighten the thumbnuts to set the position.Caution Do not turn the lens more than 360° as this may cause internal cables todisconnect or break.Caution Retighten the locking screws to prevent loss of adjustment.