JVC VN-T216 Quick Manual

Also see for VN-T216U: Specifications Specifications Instructions Instructions Instructions

Contents

3Disassembling the Camera• Gently remove the screw to take off camera housing (4)• Remove the inner liner (3) by pulling it free of the two notches (2) in the housing.• Set the camera housing (5) and liner (3) aside.Connecting the Power WiringConnect the power supply cable to the power connectors.Select one of the following options.• For DC12VConnect 12 V (-) to terminal =DC12V-Connect 12 V (+) to terminal =DC12V+• For AC24VConnect 24 V (~) cables to terminals ~AC24V.• PoEConnect the network cable to the RJ45 terminal using a switch.Caution If using a DC supply, make sure the polarity is correct. Incorrect connectionmay cause malfunction and / or damage to the camera.NoteConnectors and field wiring terminals for external Class 2 circuits provided withmarking indicating minimum Class of wiring to be used. Class 2 shall bemarked adjacent to the field wiring terminals.