JVC VN-T16U Instructions Manual

Also see for VN-T16U: Specifications Instructions Quick guide Specifications Instructions

3CautionConnect only one camera to the power line,AC24V/DC12V. Do not share the power line with otherequipment. The power cable between power source andthe camera must be under 3 m.Caution When powering the camera from AC24V, a UPS sourceshould be considered to ensure satisfactory performance.FCC Compliance StatementInformation to the user: This equipment has been tested and found tocomply with the limits for a Class A digital device, Pursuant to Part 15 of theFCC Rules; these limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates,uses, and can radiate radio frequency energy and, if not installed and used inaccordance with the instruction manual, may cause harmful interference toradio communications. However, there is no guarantee that interference willnot occur in a particular installation.If this equipment does cause harmful interference to radio or televisionreception, which can be determined by turning the equipment off and on, theuser is encouraged to try to correct the interference. For example, tryreorienting or relocating the receiving antenna, increasing the separationbetween the equipment and receiver, or connecting the equipment to an outleton a different circuit.CautionChanges or modifications not expressly approved by the partyresponsible for compliance could void the user’s authority tooperate the equipment.This Class A digital apparatus complies with Canadian ICES-003.