JVC VN-H37U Series Instructions Manual

Also see for VN-H37U series: Specifications Operation manual Guide Instructions Instructions

1How to read the manualContents of this manualThis manual explains how to set up the PC to confi gure the camera settings and how to connect the camera to the PC.Our company holds the copyright of this manual.This manual may not be reprinted or reproduced either in part or in wholewithout the prior consent of the company.Windows and Internet Explorer are registered trademarks of Microsoft Corporation in the United States and other countries.Product names of other companies described in this manual are trademarks or registered trademarks of the respective companies.Symbols such as TM, ®, © are omitted in this manual.Design, specifi cations and other contents described in this manual are subject to change without prior notice for purposes of improvement.Instructions for installing this camera can be found in "Instructions (Installation)".For image and network settings, please refer to the "Instructions (Setting)" of the supplied CD-ROM.For the latest information, please refer to the "README" fi le in the CD-ROM supplied with this product.The supplied CD-ROM disk contains the "Instructions (Setting)" (pdf), "API Guide" (pdf), "JVC-VN-SearchTool", "JVC-VN-IPSettingTool" and "README" (txt) files.••••••••••Symbols in this manualNote : Operational precautions are provided.Memo : Limitations related to functions and use, and other helpful information are provided.☞ : Reference pages or reference items are shown.IP address setup procedure * This item is based on Windows 7 and Internet Explorer 8.0.Set the IP address of the camera in the following steps.Set the IP address of the PC usedfor configuring camera settings.Setup of the IP address ofthe PC used for settingsSet up the Internet Explorer toconnect the camera to the PC.Setup of Internet ExplorerConnect the camera to the PC usedfor confi guring camera settings.Connection of the camerato the PCCall the [Basic Setting1] settingwindow, and set the [IP Setting] to"DHCP Disable" or "DHCP Enable".IP address setting for thecameraStep 1 Step 2 Step 3 Step 4Step 1 Setup of the IP address of the PC used for settingsThe camera is assigned the "DHCP Disable" (the DHCP client function is Off) during shipment. The camerais fi rst started up using the following IP address. Set the IP address of the PC correctly so that you cancommunicate with the following. (For example, set the IP address to "192.168.0.100" and the subnet mask to"255.255.255.0".)NoteIf multiple cameras are turned on simultaneously in the same LAN environment, access attempts may faildue to IP address duplication. Set up an IP address by either using the JVC-VN-IPSettingTool (included onthe supplied CD-ROM) or turning the power supply of each camera on separately to avoid duplication.•IP address of the camera (factory default)IP Address 192.168.0.2Subnet Mask 255.255.255.0Default Gateway NoneStep 2 Setup of Internet Explorer1 Launch Internet Explorer on the PC.2 If proxy settings are enabled in Internet Explorer,disable them as follows:1 Select [Tools] - [Internet Options] - [Connections] - [LAN Settings]in this order.2 From the [Local Area Network (LAN) Settings] window, select[Proxy server] and uncheck the [Use a proxy server for your LAN]box.Uncheck this box.3 If the active script of Internet Explorer is disabled,follow the steps shown below to enable it.1 Select [Tools] - [Internet Options] - [Security] - [Trusted sites].2 Click the [Trusted sites] button, and uncheck the [Require serververifi cation (https:) for all sites in this zone] box.3 Add the URL of the camera to the zone. If you use the camera withfactory defaults, add the following URL to the zone.http://192.168.0.24 Select [Tools] - [Internet Options] - [Security] - [Trusted sites], andclick [Custom Level].5 From the [Security Settings] window, select [Scripting] and set the[Active scripting] to [Enable]. Select [Enable].4 If ActiveX controls and plug-ins of Internet Explorerare disabled, follow the steps shown below toenable them.1 Select [Tools] - [Internet Options] - [Security], and click [Trustedsites].2 Click [Custom Level] to open the [Security Settings] window.3 Set all options of [ActiveX controls and plug-ins] to [Enable].Also, select [Miscellaneous] and set [Allow Script-initiated windowswithout size or position constraints] to [Enable].Select [Enable].5 Disable pop-up block.If the pop-up block is "enabled" in Internet Explorer, you will not be able to connect the camera.In thiscase, set the pop-up block to "Disable" using the following steps.1 Select [Tools] - [Pop-up Blocker] - [Turn Off Pop-up Bloker], and all sites are permitted.2 To allow only specifi c sites such as this unit, select [Tools] - [Pop-up Blocker] - [Turn on Pop-upBlocker].3 Select [Tools] - [Pop-up Blocker] - [Pop-up Blocker Settings] to open the [Pop-up Blocker Settings]window. In the opened window, add the address of the camera as a permitted Web site address.6 If plug-in tools are included in Internet Explorer, disable the pop-up blockfunction of these plug-ins tools as well.7 Enable [Every time I visit the webpage].If checking for newer versions of pages stored by Internet Explorer isnot set to "Every time I visit the webpage", you cannot perform whitespot correction. (☞ "Instructions (Setting)") In that case, follow theprocedure below to set checking for newer versions of stored pagesto "Every time I visit the webpage".1 Select [Tools] - [Internet Options] - [General] - [Temporary InternetFiles] - [Settings] - [Every time I visit the webpage].Select [Every time I visitthe webpage]LST1270-001BVN-H37U/H57U Series Instructions(IP Address Settings)Operating EnvironmentsRecommended PC SpecificationsOS : Windows 7 Professional (SP1)/Windows Vista Business (SP2)/Windows XP Home Edition (SP3)/Windows XP Professional (SP3)CPU : Intel Core 2 Duo, 3GHz or higherMemory capacity : 2 GB or moreFree hard disk space : 512 MB or more of free spaceDisplay and video card : 1600 x 1200 pixels or more, True Color (24 bit or 32 bit), VRAM 1GB or morerecommendedWeb browser : Internet ExplorerWindows XP : Version 6.0Windows Vista : Version 7.0Windows 7 : Version 8.0NoteThe operation of any Web browser other than Internet Explorer is not reliable.The Built-in Viewer consists of the ActiveX software components. When you use the Built-in Viewer in the firsttime, the ActiveX software is installed. However, the installation may be rejected by the anti-virus softwaresettings.If this occurs, change the anti-virus software settings.LAN environments10BASE-T/100BASE-TX network interconnected using IEEE 802.3-compliant switching hubsIEEE 802.3af-compliant switching hub when PoE is usedIGMPv2-compliant network when multicast is in useCategory 5 or higher grade LAN cable while being connected••••••HD NETWORK CAMERAAll manuals and user guides at all-guides.comall-guides.com

/ 2

Related manuals for JVC VN-H37U series