JVC VN-E4 Startup Manual

Also see for 4ch Network Encoder VN-E4: Instructions Api guide Instructions

Contents

11IP Address SettingThere are 2 ways to set the IP address of VN-E4.(A) Assigning IP address to VN-E4 from the DHCP server(B) Assigning a static IP address to VN-E4 upon turning off the DHCP client function of VN-E4The DHCP client function is set to ON in the factory settings of VN-E4. By assigning an IP address from the DHCP server,VN-E4 can be connected to the network without manual setting of IP address. Information on the IP address assigned to VN-E4will be required when viewing VN-E4. Consult your DHCP server administrator on the IP address assigned by the DHCP serverto VN-E4. The search tool in attached CD-ROM is available to know IP address of VN-E4. Refer readme file of the tool fordetailed information.Set up the PC for setting the IP address.[Minimum PC specifications for setting]OS: Windows XP Pro (SP2) or Windows XP Home (SP2)Web browser: Internet Explorer V6.0 (1) System configuration for setting the IP addressTo set a static IP address for VN-E4, connect VN-E4 and PC to a switching hub using straight LAN cables of Category 5 orabove. (Do not connect the DHCP server to the switching hub.)Supply power to VN-E4 using the AC adaptor.The DHCP client function is set to ON in the factory settings of VN-E4. In LAN without DHCP server, VN-E4 starts with followingIP address after about 2 minutes from power on.IP address : 192.168.0.2Subnet mask : 255.255.255.0Default gateway : 192.168.0.254(A) Assigning IP Address from the DHCP Server(B) Assigning a Static IP Address