JVC TH-D227B Quick Start Manual

Also see for TH-D227B: Instruction manual

Install the battery correctly in the battery compartment. Normally the battery’spositive polarity (+) will face up.Remove the Plastic Strip from the Remote ControlThe unit has a pre-installedlithium CR2025 battery. Removethe protective tab to activate theremote control battery.Connecting Your Soundbar to the TV•Operating Your Remote Control•Soundbar Sockets Overview•Quick Start GuideCompact SoundbarTH-D227BThank you for purchasing your new product.We recommend that you spend some time reading this Quick StartGuide in order that you fully understand how to connect yourSoundbar to your TV.Use your Soundbar instruction manual and TV instruction manual tochoose the best way to connect your Soundbar and TV together.Unpacking•Remove all packaging from the unit. Retain the packaging. If youdispose of it please do so according to any local regulations.To get the most from this product, you may need to buy anOptical cable.Battery Replacement for the Remote Control1. Gently push the tab of the battery tray in and slide it freefrom the remote control.2. Replace with a newbattery3. Slide the battery tray back into the remotecontrol.Main UnitRemote Control(battery included)Wall Bracket × 2Screw × 4Dowel × 4Mains CableCoaxial Cable3.5 mm to 3.5 mmStereo Audio CableInstruction ManualQuick Start GuideConnecting to the TVMethod 1: OPTICAL / COAXIAL ConnectionUse an optical cable (not included) / coaxial cable (included) to connect the soundbar’s OPTICAL / COAXIAL socket to the OPTICAL OUT /COAXIAL OUT socket of the external device. The simplest option is to connect your soundbar directly to your TV. If you connect the soundbarto another external device (e.g. Blu-Ray player), you will hear the sound from that device through the soundbar.After the connection is completed,1. Press on the unit or remote control to switch on the unit.2. Press SOURCE repeatedly to select Optical or Coaxial mode.The unit may not be able to decode all digital audio formats from the input source. In this case, the Optical/Coaxial indicator will flash in white/orange, and the unitwill prompt “Unsupported format, please refer to the Instruction Book”. This is NOT a defect. Ensure that the audio setting of the input source (e.g. TV, gameconsole, DVD player, etc.) is set to PCM (Refer to the user manual of the input source device for its audio setting details) with Optical/Coaxial input.Ensure the unit is disconnected from the mains socket before connecting it to other devices.Optical cable (not included)TVRear View of the SoundbarCoaxial cable (included)1. COAXIAL Socket2. AC~Power Socket3. OPTICAL Socket123 544. AUDIO IN Socket5. SERVICE ONLY SocketBlu-ray Player / DVDPlayer / RecorderSet-top BoxSatellite Receiver Game Console Video CameraDO NOT connect the soundbar to the TV through its Yellow/Red/White sockets.”Or

/ 2

Related manuals for JVC TH-D227B