44Operating other devices using the remote controlYou can operate your TV, video cassette recorder(VCR) and digital broadcast satellite (DBS) usingthe remote control of this system.1 Slide the remote controlmode selector to [TV].2 Hold down [TV F].• Hold down [TV F] until you finish step 4.3 Press [ENTER] and release.4 Press number buttons to enter themanufacturer code.Examples:For a Hitachi TV: Press [1], then [0].For a Toshiba TV: Press [0], then [8].When the manufacturer of your TV has 2 or morecodes, select the manufacturer codes in turn andfind the one that operates the TV and the remotecontrol properly.5 Release [TV F].NOTE• Manufacturer codes are subject to change with-out notice. You may not be able to operate theTV produced by the manufacturer.• After replacing the batteries of the remote con-trol, set the manufacturer code again.Operating a TV using theremote controlManufacturer CodeJVC 01Hitachi 10Magnavox 02Mitsubishi 03Panasonic 04, 11Philips 15RCA 05Samsung 12, 18, 19, 20, 21Sanyo 13, 14Sharp 06, 16, 17Sony 07Toshiba 08Zenith 09Setting the manufacturer codeRemote controlmode selectorNumberbuttons/TV RETURN/100+Operating other devices using the remote control(Continued on the next page)