JVC RX-D301S Instructions Manual

Also see for RX-D301S: Instructions Instructions Instructions Service manual Service manual

Contents

5ANTENNACOAXIALFM 75AM EXTAM LOOPANTENNASnap the tabs on theloop into the slots ofthe base to assemblethe AM (MW) loopantenna.Connecting the FM and AM (MW) antennasDo not connect the AC power plug to the wall outlet until all connections are completed.AM (MW) loop antenna(supplied)If AM (MW) reception is poor,connect an outdoor single vinyl-covered wire (not supplied).AM (MW) antenna connectionConnect the AM (MW) loop antenna supplied to the AM LOOPterminals.Connect the white cord to the AM EXT terminal, and connect theblack cord to the H terminal.Turn the loop until you have the best reception.• If the reception is poor, connect an outdoor single vinyl-coveredwire (not supplied) to the AM EXT terminal. Keep the AM (MW)loop antenna connected.FM antenna connectionConnect the FM antenna supplied to the FM 75 Ω COAXIALterminal as a temporary measure.Extend the supplied FM antenna horizontally.• If the reception is poor, connect an outdoor FM antenna (notsupplied). Before attaching a 75 Ω coaxial cable with aconnector (IEC or DIN 45325), disconnect the supplied FMantenna.FM antenna (supplied)NOTES• If the AM (MW) loop antenna wire is covered withvinyl, remove the vinyl while twisting it as shownon the right.• Make sure the antenna conductors do not touchany other terminals, connecting cords and powercord. This could cause poor reception.If FM reception is poor, connect anoutdoor FM antenna (not supplied).