Menu
JVC PK-EXT40TG Instructions Manual
Also see for PK-EXT40TG: Instructions
            |
41 Connect the video signal source to theoptical transmitter unit (PK-EXT40TG) usingthe Dual-Link DVI cable2 Connect the projector to the GraphicsInterface (PK-VS4GD3G) using the Dual-LinkDVI cable3 Connect the optical transmitter unit(PK-EXT40TG) to the Graphics Interface (PK-VS4GD3G) using the optical fiber cable● Align the orientation of the keyway for the opticalfiber cable’s plug with that for the connectors of theoptical transmitter and optical receiver units, andinsert it all the way in until a “click” sound is heard.4 Connect the supplied power cables to theoptical transmitter unit (PK-EXT40TG) andGraphics Interface (PK-VS4GD3G), andconnect the other end of the cables to apower supply.Precautions when Connecting Optical Fibre Cable:● Do not use cables that do not meet the allowablebending radius. Refer to the instruction manual for the“Optical Fiber Cable”.● Lay the optical cable ensuring that no heavy objectsare placed on it, no one steps on it, and it is not caughtin the door.● If a part of the optical cable is subject to stress, protectthe section such as by using a cover.● After plugging the optical cable into the unit, makesure that the base of the cable plug is not bent acutely.1 Perform installation according to [Installationand Connection]2 Turn on the power for the optical transmitterand optical receiver units● After connection is established, the AOptB StatusLED on the optical transmitter and optical receiverunits will light up.Caution:If AOptB does not light up, check for the following.● Improper connection of the connectors: Check the connection.● Dirt on the connector terminal surface: Clean the terminal surface.● Broken optical fiber cable: Check connection using a different cable.3 Turn on the power of the video signal source● The ASourceB Status LED on the optical transmitterand optical receiver units light up.4 Turn on the power of the projector● The ASinkB Status LED on the optical transmitterand optical receiver units light up.● Image appears on the monitor display.Notes:● To enhance the service life of the product, prevent thedevice temperature from rising too high such as byadjusting the surrounding temperature or using a fan.Installation and Connection100l240VACCONTROLDC IN 12VDVI 4 OUTREMOTE EXT. CONTROLDVI 3 OUTDVI 2 OUTDVI 1 OUTSYNCINUSB OPTLANDual-LinkDVI Cable (Sold Separately)2 m orshorterOptical Fiber CableEF-FC1150G (Sold Separately) Dual-LinkDVI Cable (Sold Separately)ProjectorPK-VS4GD3GGraphic Interface(Sold Separately)AC 100 V to 240 VPK-EXT40TGTx UnitVideo Signal SourceAC 100 V to 240 V AC AdapterOperation |
Related manuals for JVC PK-EXT40TG
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved