(No.MB662)1-133.1.5 Removing the Micon board (See Fig.14 to15)(1) Disconnect the connector wire from Fan connected to con-nector CN461 of the Micon board. (See Fig.14)(2) Disconnect the card wire from SCART board connected toconnector CN601 of the Micon board. (See Fig.14)(3) Disconnect the card wires from Front end board connectedto connectors CN701, CN481 and CN661 of the Miconboard. (See Fig.14)(4) Disconnect the connector wire from Front end board con-nected to connector CN702 of the Micon board. (SeeFig.14)(5) Disconnect the card wire from Tuner pack connected toconnector CN421 of the Micon board. (See Fig.14)(6) Disconnect the card wire from Loader board connected toconnector CN451 of the Micon board (See Fig.14)(7) Disconnect the connector wire from power board connect-ed to connector CN981 of the Micon board. (See Fig.14)(8) Disconnect the card wire from USB jack board connectedto connector CN203 of the Micon board. (See Fig.14)(9) Remove the four screws L attaching the Micon board. (SeeFig.15)Fig.14Fig.153.1.6 Removing the USB jack board (See Fig.16)(1) Disconnect the connector wire from Front end board con-nected to connector CN301 of the USB jack board.(2) Remove the one screw M attaching the USB jack board.(3) Lift up the right side, and then slide to leftward and removethe USB jack board.Fig.16CN461CN601CN702CN421CN701CN203 CN481CN981CN661CN451LLMCN301
