JVC MC-8200LU Instructions Manual

Also see for MC-8200LU: Instructions Instructions Instructions Service manual

E17ENGLISHControl Panel Operations and LCD Display4-4. Display and operation sequenceThe sequence of display and operation after turning the power on is as shown below.POWER ON1. NORMAL DISPLAY2. ERROR DISPLAYPower OnINITIALIZINGPattern 1Normal displayPattern 2SELECT SELECTMODESELECTENTERError display 13. ID No. DISPLAYSELECTSELECTSELECTSELECTENTER4. PANEL OPEN MODEENTERSCSI-ID displayError display 2Error display 8SELECTSELECT SELECTDR1 :DR2 :DR6 :SELECTSELECT SELECTSELECTSELECT5. DOOR OPEN MODESELECTENTERPUSH SELECTPUSH SELECTEXECUTING ...... CAN BE OPENEDSELECTSELECT6. ID No. SET MODE7. COUNT DISPLAY8. IMPORT/EXPORTENTERENTERENTERENTERSELECT9. DRIVE DISPLAYPUSH SELECTPUSH SELECTID No. displayID No. entrySELECTSELECTSELECTENTERInput ID No.SELECTSELECTSELECT9. DR6SELECT10. FLSELECTSELECT2. CR1. TOTALPUSH SEL. KEYPUSH SEL. KEYInput the starttray No.Input the endtray No.Start accessingENTERENTER* 1• If the MODE, SELECT or ENTER key has not been pressed within 10seconds, the current display will return to “Normal display - Pattern 1”(except in a situation when an event is displayed or the Import/Export Traynumbers and SCSI-ID numbers are being input).*1. When the MC-CF10U OptionalCarrier is installed.