JVC LST1153-001A Instruction Manual

25This menu sets the functions built into the RM-HP790DU/RM-HP790DE.* Default values are indicated in bold characters.*1 This function is unavailable when connected to GY-HM790 series.*2 AALC + EEIB and AALCB cannot be registered at the same time.OPERATION MenuNo. Item Setting Values Function5A SHUTTER *1 STEPVARIABLESelects whether the front panel [SHUTTER] control varies the shutter speed in steps or infine variation.STEP : Shutter speed variation in steps.VARIABLE : Fine, continual variation to be used when shooting a computer monitor, etc.5B V. GAIN STEP *1 1.0 dB0.1 dBSelects the step of the gain variation using the [GAIN] control in the Variable Gain mode.1.0 dB : Turning the [GAIN] control varies the gain in 0.1 dB steps.0.1 dB : Turning the [GAIN] control varies the gain in 1.0 dB steps.5C V. GAIN MAX *1 9.0 dB12.0 dB18.0 dBSelects the maximum gain value in the Variable Gain mode.9.0 dB : Turning the [GAIN] control can vary the gain up to 9.0 dB.12.0 dB : Turning the [GAIN] control can vary the gain up to 12.0 dB.18.0 dB : Turning the [GAIN] control can vary the gain up to 18.0 dB.5D GAIN LOW -3 dB*1 ,0 dB,3 dB, 6 dB, 9 dB,12 dB, 15 dB, 18 dBSelects the gain value when the front panel [GAIN] switch is set to the ALOWB position.5E GAIN MID -3 dB*1 , 3 dB, 6 dB,9 dB,12 dB, 15 dB, 18 dBSelects the gain value when the front panel [GAIN] switch is set to the AMIDB position.5F GAIN HIGH -3 dB*1 , 3 dB, 6 dB,12 dB, 15 dB,18 dBSelects the gain value when the front panel [GAIN] switch is set to the AHIGHB position.5G SMOOTH TRANS OFFONON/OFF setting of the smooth transition function which prevents sudden change whenthe position of the [GAIN] switch or [W. BAL] switch on the front panel is changed.OFF : SMOOTH TRANS is deactivated.ON : SMOOTH TRANS is activated.5H FUNC1 NONE,BLACK STRETCH,BLACKCOMPRESS,ALC + EEI* 1 * 2 ,ALC* 2 , LOLUX* 1 ,FAW, AUTO KNEE,SKIN DETAIL,COLOR MATRIX* 1DETAIL, DNRSets the function assigned to function button [F1] on the front panel.(Default values: BLACK STRETCH)5I FUNC2 Sets the function assigned to function button [F2] on the front panel.(Default values: BLACK COMPRESS)5J FUNC3 Sets the function assigned to function button [F3] on the front panel.(Default values: ALC + EEI)5K FUNC4 Sets the function assigned to function button [F4] on the front panel.(Default values: AUTO KNEE)5Z BACK ^ Return to the previous display.