7ENGLISHSearching a station manually:Manual search1 Select the band (FM1 – 3, AM).Note:This receiver has three FM bands (FM1, FM2,FM3). You can use any one of them to listen to anFM broadcast.2 Press and hold ¢ or 4 until“M (manual)” starts flashing on thedisplay.Selected band appears.AMFM1 FM2 FM33 Tune in to a station you want while “M”is flashing.• If you release your finger from the button,the manual mode will automatically turn offafter 5 seconds.• If you hold down the button, the frequencykeeps changing (in 50 kHz intervals for FMand 9 kHz intervals for AM – MW/LW) untilyou release the button.When an FM stereo broadcast is hard toreceive:Press MO RND (monaural/random) whilelistening to an FM stereo broadcast.Each time you press the button,the MO indicator lights up andgoes off alternately.When the MO indicator is lit on the display, thesound you hear becomes monaural but thereception will be improved (the ST indicatorgoes off).To tune in to stations ofhigher frequencies.To tune in to stations oflower frequencies.MORNDLights up when receiving an FM broadcast in stereo.
