JVC KA-DV5000 Startup Manual

Also see for KA-DV5000: Instructions User guide

124.2.2 Displaying images from camerasEach video display window has its own buttons and operation menu. It is possible to operate up to four videodisplay windows separately by clicking on any of its control buttons.[ Casting ]Click the [Casting] button to start casting (streaming video). See Section 4.4 for more informationabout casting. You can also start casting by choosing [Start/Switch Casting] from the [Menu]pull-down. When casting from a window, the border of that window will turn blue and the [Casting]button is highlighted.[ Capture ]Click the [Capture] button to start recording the image from the camera to a disk drive. The[ Capture ] button will turn red when recording. You can also start recording by choosing [StartCapturing] from the [Menu] pull-down. When capturing the video to a file, the [Capture] button ishighlighted.Click [ Capture ] again to stop recording.Recorded images are saved in the location specified on Option dialog of Streamproducer. Pleasesee Section6.2, “Option dialog” for specifying a location for saving files.The capture function is independent of casting. You can be casting from one source at the sametime you are capturing from another (or the same) source.This capture function is used for capturing video streams from connected cameras, mot thestream that is being cast. See Section 4.5 for information about capturing the cast video.[ Setting ]Click the [Setting] button to open the pages for setting and controlling many camera and networkpack functions using an Internet browser. For details on this function, please read the User'sGuide of your network pack. You can also open the page by choosing [Camera Setting] from the[Menu] pull-down.[ Trigger ]Click the [Trigger] button to start recording images from the camera automatically when thecamera starts recording. (Streamproducer detects the recording trigger from the camera andstarts recording to disk at the same time).Streamproducer will stop recording to disk automatically when the camera stops recording.The [Trigger] button appears to be pushed (highlighted) when you click it, indicating that thetrigger mode is in effect. You can also activate the trigger mode by choosing [Capture Trigger]from the [Menu] pull-down.When the trigger mode is enabled, the [Capture] button is disabled.Click the [Trigger] button again to stop the trigger mode. The [Trigger] button reverts to its normalappearance, indicating that the trigger mode disabled. You can also disable the trigger mode bychoosing [Capture Trigger] from the [Menu] pull-down. If there is a check mark next to 'CaptureTrigger' it indicates that the trigger mode is effective, and stopped if there is no check mark.Please read "Trigger mode" on Page 12 in this chapter for more details about the various triggermodes[ Sound ]Click the [Sound] button to enable sound output and hear the audio from the connected camera.You can also enable sound output by choosing [Output Sound] from [Menu] pull-down.The [Sound] button appears to be pushed when you click it to indicate 'output sound' is enabled.Click the [Sound] button again to mute the sound. The [Sound] button switches to the defaultposition which is sound off. You can also mute the sound by choosing [Output Sound] from the[Menu] pull-down. If there is a check mark next to 'Output Sound' it indicates that sound isenabled, and muted if there is no check mark.You can hear the sound from multiple windows simultaneously.NOTE: The sound button in the individual windows only controls the sound of that window, andhas no effect on the audio being cast.13[ Zoom ]Choose [Fit to Window Size], [50%], [100%] or [200%] from [Zoom] button to change themagnification of the displaying image. You can also change the magnification by choosing[Zoom] from the [Menu] pull down of each video display window. Each window can have adifferent zoom factor.When first opening a file or connecting to a camera, the default size is 100%.[ Property… ]Choose [Property...], from the [Menu] pull-down (no associated operation button) to confirm thecamera setting. You can change the camera name from this window; all other fields are read-only.[ Other Camera… ]Choose [Other Camera], from the [Menu] pull-down (no associated operation button) todisconnect from the currently connected camera and connect with another camera.[ Close ]Choose [Close], from the [Menu] pull-down (no associated operation button) to cut the networkconnection with the currently connected camera. The connection is closed only for the cameraassociated with the current window. The network connection is cut and the video display windowreverts to “No Setting”.4.2.3 Trigger modeStreamproducers’ exclusive trigger mode allows buttons on the GYDV300 or GY-DV5000 camcorder to controlthe streaming capture function of Streamproducer. Trigger mode is the unique function of the Streamcorderproducts. Three trigger modes are available; these are set from the camera menu but activated fromStreamproducer.Click the [Trigger] button to activate the selected trigger mode and the button is highlighted. To cancel thetrigger mode, click the [Trigger] button again.4.2.3.1 Setting the Trigger Mode from the cameraYou need select “MPEG REC” from the "NETWORK PACK CONFIG" menu on the camera. Please refer toyour cameras Users Guide for instructions for navigating through the menu.Downloaded from: https://www.usersmanualguide.com/