JVC JX-B555 Instructions Manual

Contents

16 -ENConnect a DVD player to INPUT terminal 4, then connect a TV equipped with a component terminalto the MONITOR OUT 2 and connect an AV receiver equipped with an OPTICAL connector to anOPTICAL output connector.This shows merely an example of connection. Also refer to the Instruction books of the other components you are using for theirconnection and operation procedures.Enjoy High-quality Video and Audio from a DVD (Optical connection)Connection precautions• Turn off the power to all components before making con-nections.• Even when connection using a component video cord out-put is used, also connect the S-VIDEO and audio cords.The audio cannot be output unless an audio cord is con-nected.JX-S555 Rear panelDVD Player (Playback deck)TV(white)(red)(white)(red)(white)(red)(green)(blue)(red)(green)(red)(blue)(white)(red)TV(Equipped with component terminals)INPUT1 2 4 5OUTPUT1 2AUDIORIGHTLEFTVIDEO1 2AUDIORIGHTCr/PrYCb/PbCr/PrYCb/PbCr/PrYCb/PbLEFTOPTICALOPTICALOPTICALMONITOR OUTAUDIORIGHTLEFT4Cr/PrYCb/PbOPTICALVIDEOVICTOR COMPANY OF JAPAN, LIMITED. MADE IN JAPAN AVIS : RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIRWARNING : SHOCK HAZARD-DO NOT OPENAV receiverToAUDIOOutputToS-VIDEOOutput(white)(red): Signals(green)(blue)(red)To Component Output To Component OutputTo Digital AUDIO OutputToS-VIDEOInputToAUDIOInput(white)(red)ToComponentInputToAUDIOInput(green)(blue)(red)• The video signals from the VIDEO component input at IN-PUT 4 and 5 are output only at the component video out-put terminals of MONITOR OUT 2. The video signals arenot converted into composite video and S-VIDEO signals.• The OPTICAL signal from INPUT 4, 5 can only be out-put to the AUDIO MONITOR OUT OPTICAL connector. Itis not converted to an analog AUDIO signal.• To watch the video input to INPUT 1 - 3 , also connect aTV to the MONITOR OUT 1.