JVC HD-ILA HD-52G587 User Manual

Also see for HD-ILA HD-52G587: User guide

44Onscreen MenusThis feature is used if you have a DTV or HDMI compatible component connected to yourmonitor.Press the MENU buttonπ† To DIGITAL-IN AUDIO√® To select ANALOG, DIGITAL or AUTOPress the Menu button when finishedNotes:• If you connect the HDMI device to the HDMI 1, chooseDIGITAL. If you connect the DVI device to the HDMI 1, choose ANALOG.• Refer to your DTV or HDMI component’s instruction manual for more information.• When you select AUTO, the monitor will select "ANALOG" or "DIGITAL" automatically,depending on the audio input from the HDMI.INITIAL SETUPSELECT OPERATE EXITMENUNEXT PAGEPREVIOUS(1/4)DIGITAL-INDIGITAL-IN AUDIOSIZE1DIGITALThe DIGITAL-IN option can only be displayed in the INITIAL SETUP menu when an HDMI480ppicture signal is being input to the DIGITAL-IN terminal. This option adjusts the position whenan HDMI or DVI 480p picture signal is being displayed on the screen. There are two types ofHDMI480p picture signals: 640x480 and 720x480. If the displayed picture is slightly shifted, theposition can be adjusted by selecting either SIZE1 or SIZE2.Press the MENU buttonπ† To DIGITAL-IN√® To enterπ† To select AUTO, SIZE1 or SIZE2Press the MENU button to finishDigital-InDigital-in AudioINITIAL SETUPSELECT OPERATE EXITMENUNEXT PAGEPREVIOUS(1/4)DIGITAL-INDIGITAL-IN AUDIOSIZE1DIGITALNotes:• The DIGITAL-IN menu can only be displayed when a HDMI or DVI 480p picture signal isinput to the Digital-In terminal and the picture is being displayed on the screen.• You can select AUTO only when the signal is 480p for HDMI. When you select AUTO, thetelevison will select "SIZE1" or "SIZE2" automatically.Downloaded from www.Manualslib.com manuals search engine