JVC GV-LS2 Connection Manual

Also see for GV-LS1 U: Specification sheet User guide User guide User guide User guide

Contents

the internet

24Distribution on UstreamOnce JVC CAM Control is installed onto a computer running Windows,JVC CAM Driver is installed at the same time.Images from the camera can be streamed via Ustream using JVC CAMDriver and Ustream Producer (http://ustream.tv/producer/) together.• Install JVC CAM Driver (for Windows) and Ustream Producer ontoyour computer.• Connect your camera to the Wi-Fi LAN router.Make sure your camera and computer are connected to the samerouter.• For how to connect your camera to the router,see 'Connecting Wirelessly to Wi-Fi LAN Router' on page 7.• To connect 2 or more cameras via ethernet, you should change the IPaddresses of each cameras to the value that does not overlap.Or you may use 'AUTO' setting(DHCP). In that case, cameras obtain IPaddresses from your router automatically.See 'Change the camera’s IP address setting to 'AUTO'' on page 22.Changing the Streaming setting⇒ Go to page 25.Registering your camera in JVC CAM driver⇒ Go to page 27.Adding your camera to Ustream Producer⇒ Go to page 29.Required SettingsPreparation231