JVC GV-DT1 Instructions Manual

Also see for GV-DT1: Instructions

EN 33PRINTING FROM the PCPrepa ra tion:Capture the picture referring to “ Capturing a Picture into the PC” on the previous page.1. Work on the characters and other data with the M GI PhotoSuite provided or othercommercially available painting software.• See the instruction manual provided with the software for details.2. Press the printer O N LIN E button to bring the O N LIN E lamp into lighting.3. Set up the printer.(Example)• WindowsT 95Select [Print (P)] of the File menu to call up the print display. Select [JVC GV-DT1] in theprinter name box.• WindowsT 3.1Select [Printer Setup (R)] of the File menu to call up the printer setup display. Select [JVCGV-DT1] as the printer name.O perations and displays may be different than described above in some applications.Refer to the application’s instruction manual for details.4. Call up the printer setup display (setup dialog).(Example)• WindowsT 95Click (Properties (P)) on the print display and the (Setup Dialog) box appears. (See page 34)• WindowsT 3.1Click [Option (O)] on the printer setup display, and the [Setup Dialog] box appears.(See page 34)• Select print orientation, number of prints and image adjustment.• When this is done, click OK. The new settings are saved and the Setup Dialog box closes.5. To start printing ...• Click (OK) on the print display to open the (Spooler) window. (See page 35)When the all the print data is transferred to the printer (the spooler bar reaches the end),printing starts.N O TE : Printing may not work properly with some software programs.Do not give a printing instruction to the PC while the printer is printing with the PRINTbutton pressed, as this may result in the picture printed being abnormal.You cannot print the captured image with the provided Driver & Capture Utility Software. Use acommercially available Paint or other photo editing software program to print the image.Downloaded from: https://www.usersmanualguide.com/