JVC GV-DS1DU Instructions Manual

Also see for GV-DS1: Instructions Instructions Instructions

Contents

26VIDEO CAPTURE (cont.)AUTOMATIC CAPTUREAutomatic video capture is available only when a JLIP-compatible video source unit is con-nected. There are two types of automatic capture: Program mode and Interval mode. You cansave time in either mode because, once the initial settings have been stored or you have decidedwhat pictures to capture, the subsequent capture process is carried out automatically.PROGRAM CAPTUREIn the Program Capture mode, select the images you want to capture, and the JLIP VideoCapture Docking Station will automatically capture and transfer the images to your computer.Preparation•Make sure all units are properly connected(Z p. 12).•Insert a tape into the video source unit.Click "Image Format" from the "Set-up"menu and select "Field Picture" in theCapture Mode (Z p. 29).1 From the menu bar, click "Set-up" —"Capture Mode" — "Automatic".•The "Automatic Transfer" windowappears.2 Select image to be transferred.•When you select "Index Image", onlythe index image (80 x 60 pixels) istransferred to your computer.•When you select "Index & Full Image",both the index image (80 x 60 pixels)and full image (640 x 480 pixels) aretransferred to the computer.3 Select "Program Capture" and click"OK".Set-upCapture ModeImage FormatDevice ChangeInitializeID ChangeCounter ResetStep by StepAutomaticNOTE:•Before transferring your images, makesure that enough space is available onyour hard disk. For full image data spacerequirements, Z p. 24.•When transferring full image data usingthe Bitmap image format (9.bmp), thetransfer takes a very long time, causingthe video source unit to stop playbackautomatically.