JVC GR-DVL100 Instructions Manual

Also see for GR-DVL100: Instructions Instructions Instructions

EN21Menu Screen Explanations: Factory-presetRefer to “Fade/Wipe Effects” ( pg. 24, 25).Refer to “Programme AE With Special Effects” ( pg. 26).Refer to “Exposure Control” and “Iris Lock” ( pg. 27).Refer to “White Balance Adjustment” and “Manual White Balance Operation”( pg. 28).Allows you to set the recording mode (SP or LP) depending on your prefer-ence ( pg. 11).Enables recording of stereo sound on four separate channels, and is recom-mended for use when performing audio dubbing ( pg. 49). (Equivalent tothe 32 kHz mode of previous models)Enables recording of stereo sound on two separate channels. (Equivalent tothe 48 kHz mode of previous models)When set to “10X” while using digital zoom, the zoom magnification willreset to 10X since digital zoom will be disengaged.Allows you to use the Digital Zoom. By digitally processing and magnifyingimages, zooming is possible from 10X (the optical zoom limit), to a maximumof 40X digital magnification.Allows you to use the Digital Zoom. By digitally processing and magnifyingimages, zooming is possible from 10X (the optical zoom limit), to a maximumof 450X digital magnification.Allows you to shoot dark scenes with no picture brightness adjustment.The overall appearance may be grainy, but the image is bright.The shutter speed is automatically adjusted (1/25 — 1/200 sec.). Shooting asubject in low or poor lighting at 1/25 sec. shutter speed provides a brighterimage than in the AGC mode, but the subject’s movements are not smooth ornatural. The overall appearance may be grainy. When the shutter speed isautomatically adjusted, “ ” is displayed.The tally lamp comes on to signal the start of recording.The tally lamp remains off at all times.This number is necessary when connecting the camcorder to a device such as a computerusing the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 06.CONTINUED ON NEXT PAGECAMERA MENUFADER/WIPEP.AE/EFFECTEXPOSUREW.BALANCEREC MODESOUNDMODEZOOMGAIN UPTALLYIDNUMBER12 BIT16 BIT10X40X450XOFFAGCAUTOONOFFNOTES:●The “ CAMERA MENU” settings are effective when the Power Switch is set to both “ ” and “ ”.●“REC MODE” can be set when the Power Switch is set to “ ” or “ ” (pg. 11, 30).