| 
34ENGLISH3: 45PMFLATConnected Device NameBluetooth PhonePOWER]ON~ Select “Bluetooth Phone.”Ÿ Enter the menu.! Establish the connection with a device,then make a call (or settings using the menu).☞ pages 32, 48, 56, and 57When the sound is stopped or interrupted duringthe use of a Bluetooth device, try the followingremedies.• Turn off, then turn on the unit.• (When the sound is not yet restored,) connect thedevice again. (☞ “Connecting/disconnecting aregistered device” on page 33)Using the Bluetooth cellular phone* 1 You can adjust the volume level for “Bluetooth Phone”without affecting the volume level for other sources.*2 Appears only when the information comes from thedevice.*3 Each time you press 5 ∞, the registered devicename (and “NEW DEVICE” when a new device can beregistered) appear in turn.*4 When a cellular phone with audio function isconnected, appears.You can adjust the microphone volume level. (☞ page57)Status of the device* 2Signal strength/Battery remainderAdjust the volume* 1When a call comes in...The source is automatically changed to “BluetoothPhone”.When is activated...The unit answers the incoming calls automatically.(☞ page 57)• When <Auto Answer> is deactivated, press anybutton (except ATT or +/–) to answer theincoming call.☞ page 46Press: Display <Dial Menu>Answer incoming callHold: Display <Redial> listTo end the call or reject an incoming callHold any button (except ATT or +/–).Answering a waiting callIf your cellular phone is equipped with the call waitingfunction, you can put the current call on hold andanswer the waiting call.Press any button (except ATT and +/–).• To restore the on-hold call, press any button (exceptATT and +/–) again.• When you end one call, you can connect to theother.Connecteddevice name *3Name and phone number (if acquired)Turns Blue when the Bluetooth device is connected.* 4 |
