Menu
JVC EX-D1 Service Manual
Also see for CA-EXD1: InstructionsInstructionsSchematic diagramsInstructions
                                    |
1-26 (No.MB399)4.1.3 DVD test mode6. DVD initializeDVD module initialized.LCD segment is light on at initialize command.DVD initialize is completed.Press the [3D PHONIC]button on the main unit .5. DVD test modeIn to the DVD test mode.Test mode contents is refer to module specification.DVD test mode is canceled by POWER OFF andexcept source DVD.Insert a power cord in an outlet while pressingthe [PLAY] and [PAUSE] buttons on the mainunit simultaneously.This unit is set to DVD test mode.The details refer to "4.1.3 DVD test mode".DVD test mode.T xxy vwInitialization state from DVD UNITStudy state information from DVD UNITRegion numberReceived DESTINATION information:JC/1U/D/E/2U/3U/UB/UT/4U/UY/EE/UF1. To enter DVD TEST mode,(1) AC POWER ON while holding PLAY+PAUSE keys.(2) DVD Mecha will start in TEST MODE, FL will display:2. To exit DVD TEST mode,During TEST MODE (except for Device Key write & DVD Region Re-write), press POWER KEY.To exit TEST mode for Device Key Write & DVD Region Re-write, first AC OFF, then AC ON again to return tonormal state.3. EEPROM INITIALIZATION3.1 NORMAL INITIALIZE(1) During DVD TEST MODE, press STOP key on remote control to start NORMAL EEPROM INITIALIZATION.(2) FL will display:3.2 FULL INITIALIZE(1) During DVD TEST MODE, press >>| key on set 2 seconds control to start FULL EEPROM INITIALIZATION.(2) FL will display:T xxy vwInitialization state from DVD UNITT xxy vwInitialization state from DVD UNIT4. DEVICE KEY CHECKSUM DISPLAY(1) During DESTINATION INFO display screen (1), press MENU key to enter DEVICE KEY CHECKSUM display.(2) FL will display:DKxxxx (Example) DK470B |
Related manuals for JVC CA-EXD1
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved