JVC DV-180 Operation Manual

Contents

Table Of Contents
DESCRIPTION4
TOOL AND EQUIPMENT
CAMERA CONTROL
POWER INDICATOR
ZOOM & FOCU -
C OMPUTER C ONTROL
REAR PANEL DIP
RS-422 C ONNECTORS
C OMMUNICATION
trouble shooting

5.6 RS-422 CONNECTORSThe four connectors labeled “CAM1”, “CAM2”, “CAM3”, and “CAM4” on the connector plate are sixposition, four conductor modular jacks. This connector provides RS-422 level differential signals to andfrom the digital pan and tilt head. The RS-422 is the interface from the controller to the pan and tilt heads.Shown below is the pin-out for the RS-422 connector. The pin assignment for this connector follows:Pin 2 Pin 5 Pin 6NotUsedPin 1NotUsedThe camera connector pin assignment:Pin # Description2 P/T Data Out - (Data In to the DV-180 Controller)3 P/T Data Out +4 P/T Data In - (Data Out of the DV-180 Controller)5 P/T Data In +JVC DV-180 PAN/TILT Operations Manual Doc #: D0154-A13