186 Select Time Zone.7 Select Auto Channel Scan.Note: Scanning may take some time to complete.Select Stop Scan to cancel the auto scan at any time.8 Finish.Basic OperationsChanging Channel/VolumePress the number buttons to directly selectchannels.Note: After pressing the number buttons, there will bea few seconds delay before the TV changes channel. Tochange to the channel right away, press OK after pressingthe number buttons.To Browse ChannelPress the Channel +/- buttons on the remotecontrol.Press to scroll through thechannels manually.To Adjust VolumePress the Volume +/- buttons on the remotecontrol.Press to adjust volume level.To Select Analog Channels1~9 Press 1~9 as needed.Example, to select channel 2,press 2, then press OK.10~99 Press the 2 digits in order.Example, to select channel 15,press 1, 5, then OK.100~135: Press the 3 digits in order,Example, to select channel 130,press 1, 3, 0, then press OK.