JVC DLA-L20U - D-ila Projector--3:1-6:1 Lens,2000 Lumen Instructions Manual

Contents

11ENGLISH1 Y/C (S video) input terminal (Mini DIN 4 pin)Connect this terminal to the S video output terminal of aVCR, etc.2 VIDEO (composite video) input terminal (BNC)Connect this terminal to the composite video output terminalof a VCR, etc.3 Y, P B /B-Y, P R/R-Y input terminals (BNC)These are input terminals for component (Y, B-Y, R-Y)signals or DTV-format (Y, PB, PR) signals.Device with component output terminals can beconnected.* For details about DTV-format signals (480i, 480p, 720p,1080i) compatible with this unit, refer to page 69.4 AUDIO L/R (Audio • left/right) input terminals (pin jacks)Of devices connected to the video input terminals, suchas a VCR, etc., the audio output terminals of the device tobe projected is connected to these terminals. The inputaudio signal is reproduced by the speakers of the projector.The signal is also output from the AUDIO OUT terminal ofthe projector.* When the input signal is stereo signal, connection shouldbe made to both L and R.* Signals from a monaural device should be connected toonly L. That way, the projector’s speakers and the AUDIOOUT terminal produce the same sound from both L and R.MemoTo select the proper audio input for video input:The video input terminals (AV IN input terminals) can be switchedwith the projector’s or remote control’s VIDEO button. However, sincethis projector has only single audio input terminal, reconnect audioinput in accordance with the AV device to be used.Controls and Features (Cont.)Connector Panel5 AUDIO OUT (audio output) terminal (stereo mini jack)Of input signals inputted to the projector, the audio signalof the device being projected is output. Volume should beadjusted using the VOL. (+/–) buttons on the remote controlor VOLUME on the setting menu. When a cable isconnected to this jack, no audio sound is produced fromthe projector’s speakers.6 REMOTE terminal (mini jack)Connect an infrared remote control extension unit, etc. tothis jack.* For details, consult your dealer.7 RS-232C terminal (D-sub 9 pin)This is a RS-232C interface-specified terminal. Thisprojector can be controlled by a computer connectedexternally.* For details, consult your dealer.8 COMPUTER OUT (computer output) terminal (D-sub3-row 15 pin)The computer input signal projected on the screen is output.A display unit can be used by connecting it to this terminal.YPCAUDIOAUDIOAUDIOAUDIO OUTREMOTEY/C VIDEOYPB /B-YPR /R-YLRH/CSVRGBCOMPUTEROUTRS-232Cw 1 2qp98 7 6 534