JVC BD-X200U Instructions Manual

Also see for BD-X200E: Instructions Instructions Instructions

75Setting the Setup MenuSettings made in the setup menus are stored in the BD-X200’s internal memory and will be retained even when the power is turnedoff. It is also possible to return to default settings whenever so required.In addition to the buttons on the front panel, a keyboard and mouse can also be used to perform operations on these menus. Thefollowing section, however, will describe operations performed using the front panel buttons.Keyboard : Select using the arrow keys (∞ and √), and confirm the selection using the Enter key.Mouse : Left click the required item.Setup menu operations are carried out while monitoring the display on the monitorconnected to the VIDEO LINE OUT terminal. In addition, setup menu content alsoappears on the LCD display. Stop the DVD recorder.1.Open the Setup Menu screen.To do this, press the SET UP button2.Open the setup menu in which settings are to be modified.q Use the 6 and 7 buttons to select the required screen.w Press the SET button* The EXIT option can be selected to return to the normal screen display.3.Make the required settings in the setup menu.q Use the 6 and 7 buttons to select the parameter to be set.w Press the SET button● A list of setting values will appear.e Use the 6 and 7 buttons to select the required value from the list and thenpress the SET button.● The setting value will be modified accordingly.r Repeat steps q through e until all of the required settings have beenmade. To return to the Setup Menu, select MENU and press the SET button. To move to the next menu screen, select the † button at the top of the currentscreen and press the SET button. To return to the original menu screen, select either MENU or BACK and pressthe SET button.4.Use either of the following methods to return to the normal screendisplay.Press the SET UP button.orSelect EXIT from the Setup Menu and press the SET button.SettingsMENUTEST SIGNAL OFFFACTORY SETTING EXECUTEKEYBOARD STYLE ENGLISHEDIT MENU ENABLETOTAL RECORDING TIME 5 Hour 30 MinSYSTEM MENURestoring to Default SettingsAll settings from the various setup menus can be returned to the correspondingdefault settings by setting FACTORY SETTING from the SYSTEM MENU screento EXECUTE and by then pressing the SET button.BUSYOPEN/CLOSETOPMENU MENUOPTION DV Y/C LINESET UPSETEXITDISC MENUINPUT SELECTSYSTEMPRESET STYLERECORDERREMOTEDISPLAYCLOCK ADJUSTDUBBINGNETWORKMENUCHAPTER CREATION MANUALSET INTERVAL Every05MinTOTAL CONTENTS TIME NO USEENCODE QUALITY (Mbps) 4.4AUDIO ENCODE LPCMASPECT AUTORECORDER MENU (1/2)MENUCHAPTER CREATIONSET INTERVALTOTAL CONTENTS TIMEENCODE QUALITY (Mbps)AUDIO ENCODE LPCM4.4RECORDER MENU (1/2)MANUALAUTOSET buttonCursor buttons(6, 7, 8 and t)SET UP buttonSetup MenuRECORDER MENU (1/2) screenSetting listSYSTEM MENU screen76Setup MenuSetup MenusThe following table identifies and describes the parameters that may be set using the Setup Menus.Top half : Appearance on monitor screenBottom half : Appearance on LCD displayOption DescriptionDISC MENUDISC MENUINPUT SELECTINPUT SELSYSTEMSYSTEMPRESET STYLEPRESETRECORDERRECORDERREMOTEREMOTEDISPLAYDISPLAYCLOCK ADJUSTCLOCKDUBBINGDUBNETWORKNETWORKEXITThis button opens a menu that allows settings to be made for finalizing and other similar disc processes.This button opens a menu that allows input audio and video signals to be selected.This button opens a menu that allows settings to be made for the DVD recorder itself.This button opens a menu that allows settings to be made for title-menu and chapter-menu display styles.This buttons opens a RECORDER MENU screen containing two different pages of parameters.The RECORDER MENU (1/2) screen allows settings to be made for the chapter creation method and theencoding of audio and video.The RECORDER MENU (2/2) screen allows the settings required for recording to be made.This button opens a menu that allows settings to be made for remote operations via the DVD recorder’sRS-422A or DV terminal. In addition, this menu also allows indication of whether or not the REC CONTROLpanel is to be displayed.This button opens a menu that allows settings to be made for the display of status and alarm informationon the TV or monitor screen.This button opens a menu that allows setting of the internal clock’s date and time.This button opens a menu that allows settings to be made for DVD dubbing.This button opens a menu that allows network settings to be made for LAN terminal usage.This button is selected to return to the normal screen display.