ENGLISHFront & Rear Baffle Boards (x 2)Left & Right Sides (x 2)To install the sealed enclosureWhen the speaker cannot be attached in the car, make the sealed enclosure as recommendedin the table below—3/4 inch (20 mm) MDF is also recommended for the enclosure materials.Top & Bottom Sides (x 2)* Screw: Dia. 3/16 inch (4 mm) x 1-3/16 inch (30mm) (x 8) (supplied)* Screw: Dia. 3/16 inch (4 mm) x 1-3/16 inch (30mm)(x 8) (supplied)To install the ported enclosureWhen the speaker cannot be attached in the car, make the sealed enclosure as recommendedin the table below—3/4 inch (20 mm) MDF is also recommended for the enclosure materials.Front & Rear Baffle Boards (x 2)Left & Right Sides (x 2)Top & Bottom Sides (x 2)Mounting HoleDimensionDia. DDia. EDia. FPort HoleDimensionCS‑AW6240 CS‑AW6040A 15‑3/8 inch (400 mm) 12‑5/8 inch (320 mm)B 15‑3/8 inch (400 mm) 12‑5/8 inch (320 mm)C 11‑13/16 inch (300mm) 11‑1/32 inch (280 mm)D 11‑13/32 inch (289 mm) 9‑3/8 inch (238 mm)E 11‑29/32 inch (302 mm) 10 inch (254 mm)F 1/8 inch (3 mm) 1/8 inch (3 mm)CS‑AW6240 CS‑AW6040A 15‑3/8 inch (400 mm) 12‑5/8 inch (320 mm)B 20‑1/2 inch (520 mm) 17‑11/32 inch (440 mm)C 11‑13/16 inch (300 mm) 11‑1/32 inch (280 mm)D 11‑13/32 inch (289 mm) 9‑3/8 inch (238 mm)E 11‑29/32 inch (302 mm) 10 inch (254 mm)FGH1/8 inch (3 mm) 1/8 inch (3 mm)3‑15/16 inch (100 mm) 3 inch (76 mm)11‑13/16 inch (200 mm) 5‑15/16 inch (150 mm)MountingHoleDimensionDia. DDia. GDia. EDia. F** *** * **H** *** * **3