JVC AV-P960E Instructions Manual

Also see for AV-P960E: Instructions

E-81 [AC IN] Power InletConnect using the power cord supplied to an AC 100 V ~AC 240 V power source.2 [MONITOR OUTPUT] TerminalImage signal output terminal for confirming viewing angle.3 [RGB OUTPUT] TerminalRGB signal output terminal. Connect to the RGB input ter-minal of a projector or monitor.4 [USB] ConnectorFor connecting to devices such as computer. Image dataor image memory stored in the SD card as well as imagedata stored in this unit can be downloaded to the com-puter.☞ Page 22 ‘Connecting to Computer via the USB Con-nector’Rear PanelRefer to page 10 ‘Connection’ for details on connecting with other devices.5 [EXT INPUT] Terminal for External Sig-nal InputFor connecting to external devices such as computer. Whenusing the [SOURCE SELECT] button to select the externalinput, the signals will be output through the [RGB OUTPUT]terminal. In this case, output through the [MONITOR OUT-PUT] terminal is not possible.6 LCD Monitor Mounting Screw HoleUse when mounting the LCD Monitor (sold separately) tothis unit.☞ Page 24 ‘Installing LCD Monitor’7 [REMOTE INPUT (RS-232C)] TerminalConnect when controlling this unit via the PC using thecontrol software created by customer. For communicationmethod and command, read [RS-232C External controlcommunication commands (command. pdf)] in the providedCD-ROM.8 [NTSC/PAL] SwitchSet according to the monitor to be used.Names and Functions (continued)1 2 4 6 7 853AC IN MONITOROUTPUTRGB EXTOUTPUT INPUTINPUTNTSC PALREMOTE(RS-232C)USBDo not open the cover at the bottom of thearm and put your finger or insert object intoit. This may cause malfunction or injury.Caution