JVC AV-14FR10 Service Manual

Also see for AV-1434EE: Instructions Instructions

No. 51865AV-14FR10/AV-14F10AV-1434TEE/AV-1434EEAV-14FTT2/AV-14FTG223Item Measuringinstrument Test point Adjustment part DescriptionAdjustmentofSUBBRIGHTRemotecontrol unit3. BRIGHT 1. Receive any broadcast.2. Select 2. V/C from SERVICE MENU.3. Select 3. BRIGHT with the MENU ▼/▲key.4. Set the initial setting value with the MENU - or + key.5. If the brightness is not the best with the initial set value, makefine adjustment until you get the best brightness.AdjustmentofSUB CONT.Remotecontrol unit4. CONT. 1. Receive any broadcast.2. Select 2. V/C from SERVICE MENU.3. Select 4. CONT. with the MENU ▼/▲key.4. Set the initial setting value with the MENU - or + key.5. If the contrast is not the best with the initial set value, make fineadjustment until you get the best contrast.5. COLOUR [Method of adjustment without measuring instrument]PAL COLOUR 1. Receive a PAL broadcast.2. Select 2. V/C from the SERVICE MENU.3. Select 5. COLOUR with the MENU ▼/▲ key.4. Set the initial setting value for PAL COLOUR with the MENU -- or + key.5. If the colour is not the best with the initial set value, make fineadjustment until you get the best colour.SECAM COLOUR 1. Receive a SECAM broadcast.2. Make fine adjustment of SECAM COLOUR as previously.NTSC 3.58 COLOUR 1. Receive a NTSC 3.58MHz broadcast.2. Make similar fine adjustment of NTSC 3.58 COLOUR aspreviously.AdjustmentofSUBCOLOUR ⅠⅠⅠⅠRemotecontrol unitNTSC 4.43 COLOUR When NTSC 3.58 adjustment completed, NTSC 4.43 will beautomatically set at the respective values.