JVC AV-14A3, AV-14F3, AV-1435, AV-1438, AV-20N3, AV-21D3, AV-21E3, AV-21F3, AV-21FR3, AV-21LT3, AV-21LTR3, AV-21Q3 Instructions Manual

Also see for AV-1435: Instructions Service manual

17Using the TV’s menusMANUAL CH PRESETYou can manually preset desired TVchannels to desired channels.1 Press MENU T to display the“MENU 3” menu, then select“MANUAL CH PRESET”.MENU 3AUTO CH PRESETMANUAL CH PRESETSETUP TOURLANGUAGE ENGLISHSELECT BY EXIT BYOPERATE BY -+ DISPLAY2 Press MENU M.The sub-menu is displayed.MANUALFINESKIP NOSOUND SYSTEM B/GEXITSELECT BY PR 1 VLPROGRAM BY -+ EXIT BYSEARCH BY VOL-+ DISPLAY• The channel number is displayed as a PRnumber. For example, channel 1 will bedisplayed as PR 1. However, the AVchannel will be displayed as AV.3 Press MENU M to select thechannel number.4 Press VOLUME M to startsearching for the TV channel.“>>>” or “<<<” is displayed on thescreen.When the TV finds a TV channel, the“>>>” or “<<<” display goes out,and the TV channel is preset to thecurrently selected channel number.• If the TV channel you want to preset is notdisplayed, repeat step 4 until the TV findsthe TV channel you want to preset.• To stop the MANUAL CH PRESET function,press any button other than the VOLUMEm button.If the picture is not clear:Fine-tune the TV channel.1 Press MENU t to select “FINE”.MANUALFINESKIP NOSOUND SYSTEM B/GEXITSELECT BY PR 3 VLPROGRAM BY -+ EXIT BYFINE BY VOL-+ DISPLAY2 Hold VOLUME m down to fine-tunethe TV channel so that the best imageis displayed on screen.“>” or “<” indicates that the TV is fine-tuning the TV channel.If the sound is not clear:1 Press MENU t to select “SOUNDSYSTEM”.MANUALFINESKIP NOSOUND SYSTEM MEXITSELECT BY PR 3 VLPROGRAM BY -+ EXIT BYCHANGE BY VOL-+ DISPLAY2 Press VOLUME m to select theappropriate sound system.• For the sound systems in each countryor region, refer to the table“Broadcasting systems” on page 22.5 Press MENU T to select“MANUAL”.6 Repeat steps 3 to 5 if you want topreset another TV channel to achannel.