JVC 2B00401C User Manual

Also see for HR-XVC1U: User guide User guide Service manual User guide User guide

Contents

283Recording a TV programLoad a cassette tape with the eraseprevention tab intact.The VCR will automatically turn on.Set the TV/CATV option to the appropriate position (See page19).12 Press SP/EP to select the desired tapespeed SP or EP.The tape counter and SP or EP willappear on the screen for about 4seconds.4TV - VHF/UHF channelsCATV - CABLE TV channelsRecording and viewing thesame TV programPress Number keys or VCR CH +/– to select the channel tobe recorded.VHF/UHF/CATV CHANNELSTV CATVVHF2-13UHF14-69VHF2-13STD/HRC/IRC14-36 (A) (W)37-59 (AA) (WW)60-85 (AAA) (ZZZ)86-94 (86) (94)95-99 (A-5) (A-1)100-125 (100)(125)01 (5A)5 On the VCR, press REC.Or on the Remote, while holding REC,press PLAY." " will appear on the screen forabout 4 seconds and “REC” willappear on the display.NOTE:If the erase prevention tab is removed,the tape will eject when both the RECand PLAY are pressed for recording.If you wish to watch the DVD playbackduring the normal recording on VCR,press DVD to change to DVD modeand perform the DVD playback(seeP.37).••Turn ON the TV and set it to the video input mode.Make sure TV/VCR/DVD switch has been slided to VCR/DVD.Then press VCR to select the VCR mode. (The VCR indicatorwill light.)Preparation:••00 : 00 : 00 SPCH 110CH 110INDEX1-9 Press 0 twice and then 1-9 as required. Example: Toselect 2, Press “002”.10-12 Press 0 first and then the remaining 2 digits in orderfrom left to right.Example: Press 012 for “12”.13-99 Press 2 digits in order.Example: Press 22 for “22”.100-125 Press the 3 digits in order.Example: Press 110 for “110”.TV/VCRCH+TV VCR DVD POWERDVD MENU MARKER RETURN OPEN/CLOSEDISPLAY A.TRK C.RESET ZERO RETURNSUB TITLE ANGLE SEARCHMODESP/EPPLAYMODE ZOOM TITLE REPEATA-BTVPOWERINPUTTV VOL0 TIMER TV/VCRREW PLAYFFREC STOPPAUSESKIP/INDEX SKIP/INDEXT V /VCRCH—SET SETENTER/SELECTSET UPMENU CANCELOSDA.MONITORSLOWSKIPSEARCHVCR/DVD/TV