EN 171 Make sure the player’s power is off.2 Slide to open the card cover (MEMORY CARD).3 To load a memory card, firmly insert it with itsclipped edge first.To unload a memory card, push it once. After thememory card comes out of the player, pull it out.● Do not touch the terminal on the reverse sideof the label.4 Close the card cover.To protect valuable files (available only for SDMemory Card)…Slide the write/erase protection tab on the side of thememory card in the direction of “LOCK”. Thisprevents the memory card from being recorded over.To record on this memory card, slide the tab back tothe position opposite to “LOCK” before loading it.NOTES:● Be sure to use only SD Memory Cards marked“ ” or MultiMediaCards marked“ ”.● Some brands of memory cards are not compatiblewith this player. Before purchasing a memorycard, consult its manufacturer or dealer.● Before using a new memory card, it is necessary toFORMAT the card. ( pg. 27)ATTENTION:Do not insert or remove the memory card while theplayer is turned on, as this may cause the memorycard to be corrupted or cause the player to becomeunable to recognize whether or not the card isinstalled.Loading A Memory Card/Unloading A Memory CardMemory cardClipped edgeCard Cover(MEMORY CARD)LabelInformation On SD Memory CardSD Memory Cards up to 64 MB have been verifiedfor use with this player. (As of October 2003)Write/erase protection tabGETTING STARTED