19 Changing the settings : PictureColor TemperatureAdjusts the color temperature (color tone). The higher the colortemperature, the more bluish the picture.● The setting is fixed to “Mode-5” and unadjustable when “Color Space” is setto “ sRGB ” or “ AdobeRGB ”.● The setting is fixed to “Mode-5” and unadjustable when “PC Monitor Mode”is set to “ On ”.■ Mode-1 : Bluish display. (approx. 13000 K)■ Mode-2 : Less bluish than “ Mode-1 ”. (approx. 11000 K)■ Mode-3 : For general purpose. (approx. 9300 K)■ Mode-4 : For special purposes including medical imaging. (approx.8000 K)■ Mode-5 : Standard setting. (approx. 6500 K)■ Mode-6 : For conformation of images for printing. (approx. 5000 K)■ Mode-7 : Significantly reddish setting intended for special usages intelevision studios. (approx. 3200 K)White Balance SettingAdjusts color temperature in detail; subtle control of RGB gradations.● These settings are independent of the setting of “Color Temperature”.◆ R Drive / G Drive / B DriveAdjusts the depth of R/G/B on bright areas.■ –30 – +30 (Dilute ↔ Dense)◆ R Cutoff / G Cutoff / B CutoffAdjusts the depth of R/G/B on dark areas.■ –30 – +30 (Dilute ↔ Dense)