JVC 0803-CR-JMT Instruction Manual

18Remote control buttons and functions Freeze function[Except HV-34LH21/HV-29WH21/HV-29VH21]While watching a picture, you can capture astill picture you want. The captured stillpicture and the moving picture aredisplayed at a time. (They are the picturesof the same source.)Press the (Freeze) button.Still picture is captured and displayed on theright side of the screen. On the left, themoving picture is displayed.• The (Freeze) button does not workin the Text mode.To return to the normal screen:Press the (Freeze) button again orpress the number buttons to choose achannel.• You cannot use the FREEZE buttonwhen the sub picture or the mainpicture are displayed on the screen.• If the current channel is guarded withthe CHANNEL GUARD function andthe screen is blue, this button does notwork.• If you press the FREEZE button whenreceiving the Progressive video signal(525P signal), "525P" appears on thescreen and the FREEZE function doesnot operate. Strobe function[Except HV-34LH21/HV-29WH21/HV-29VH21]You can display eight consecutive stillpictures and one moving picture at a time.(They are the pictures of the same source.)Press the STROBE button.Eight consecutive still pictures which arecaptured at intervals of about 0.2 secondare displayed in the order of “1” to “9”.(These numbers are not actually displayed.)• The STROBE button does not work inthe Text mode.To return to the normal screen:Press the STROBE button again or pressthe number buttons to choose a channel.• If signal level of the main picture isweak, the still images becomeabnormal.• You cannot use the STROBE buttonwhen the sub picture or the mainpicture are displayed on.• If the current channel is guarded withthe CHANNEL GUARD function andthe screen is blue, the STROBE buttondoes not work.• If you press the STROBE button whenreceiving the Progressive video signal(525P signal), "525P" appears on thescreen and the STROBE function doesnot operate.MovingpictureStillpicture