JVC 0609SKMLGEEGL Instructions Manual

14Connections to Your TVMake one of the following connections, dependingon the capabilities of your existing equipment.Tips: Depending on your TV and other equipment youwish to connect, there are various ways youcould connect the player. Use only one of theconnections described below. Please refer to the manuals of your TV, StereoSystem or other devices as necessary to makethe best connections.Caution– Make sure the player is connected directly to theTV. Tune the TV to the correct video input chan-nel.– Do not connect the player’s AUDIO OUT jack tothe phono in jack (record player) of your audiosystem.– Do not connect your player via your VCR. Theimage could be distorted by the copy protectionsystem.Component Video ConnectionConnect the COMPONENT VIDEO OUT jacks onthe player to the corresponding input jacks on theTV using Y Pb Pr cables (C).Tip:When you use COMPONENT VIDEO OUT connec-tion, you can change the resolution for the output.(Refer to “Resolution setting” on page 17.)Video ConnectionConnect the VIDEO OUT jack on the player to thevideo in jack on the TV using a video cable (V).Audio (Left/Right) ConnectionConnect the left and right AUDIO OUT jacks of theplayer to the audio left and right IN jacks on the TVusing the audio cables (A).L RAUDIO INPUT VIDEOINPUTPrPbYCOMPONENT VIDEO INPUTRear of TVRear of theplayerA CV