JVC 0303-MK-ID-SN Instructions Manual

EN44 SYSTEM CONNECTIONS“ACCESSING FILES” appears on the LCD monitorwhile the PC is accessing data in the camcorder or thecamcorder is transferring a file to the PC.NEVER disconnect the USB cable while“ACCESSING FILES” is displayed on the LCDmonitor since this can result in product damage.To DV )To USBconnectorDV cable(optional)To DVconnectorUSB cable(provided)To USB (PC with DV connectorPCCore filterORCore filter[A] Using USB cable [B] Using DV cableConnection To A Personal Computer[A] Using USB cableIt is possible to do the following things:● Transfer still/moving images stored on a memory card toa PC.● Transfer still/moving images recorded on a tape to a PC.● Capture still/moving images in real-time.● Use this camcorder as a WebCam.[B] Using DV cableIt is also possible to transfer still/moving images to aPC with a DV connector by using the providedsoftware, software equipped with the PC orcommercially available software.NOTES:● Refer to “SOFTWARE INSTALLATION AND USBCONNECTION GUIDE” for the installation of the bundledsoftware and drivers.● It is recommended to use the AC Adapter as thepower supply instead of the battery pack ( pg. 7).● Never connect the USB cable and the DV cablesimultaneously to the camcorder. Connect only thecable you wish to use to the camcorder.● If the PC connected to the camcorder via the USB cableis not powered, the camcorder does not enter the USBmode.● The date/time information cannot be captured into thePC.● Use the provided software PIXELA ImageMixer tocapture video in real-time.● You can also use the camcorder for webconference byusing Windows® Microsoft Netmeeting and signing up forMicrosoft Hotmail.● Refer to the instruction manuals of the PC and Software.● The still images can also be transferred to a PC with a DVconnector-equipped capture board.● When using a DV cable, be sure to use the optionalJVC VC-VDV206U or VC-VDV204U DV cable depend-ing on the type of DV connector (4 or 6 pins) on thePC.● The system may not work properly depending on the PCor capture board you are using.● When using the DV connection refer to manufacturerinstructions of your capture board for driver’s installationand operation instructions.* When connecting cables, open this cover.Connector cover*