7the user to the next setting.C. LCD screenSTAND SLOPERmVCAL6.86 7.00 ATC MANpH1 2 3 4 51211109876CmA1. Major LCD display.2. CAL – This icon will be displayed if the meter is in the Calibration/Setting mode.3. mA – This icon, when displayed, indicate in the 4 mA or 20mA Setting mode.4. ℃℃℃℃ – Temperature and unit display.

GENERAL INTRODUCTION

USING THE JENCO MODEL 3631

B. Front panel

C. LCD screen

D. Rear connectors

E. Measure mode

F. Setting mode

G. pH calibration mode

H. RmV calibration mode

I. 4~20mA output

ERROR DISPLAY AND TROUBLESHOOTING

pH BUFFERS

SPECIFICATIONS

WARRANTY

JENCO 3631 Operation Manual

3631

JENCO 3631 Operation Manual

Product

Learn More

Legal


Contents Table Of Contents GENERAL INTRODUCTION USING THE JENCO MODEL 3631 B. Front panel C. LCD screen D. Rear connectors E. Measure mode F. Setting mode G. pH calibration mode H. RmV calibration mode I. 4~20mA output ERROR DISPLAY AND TROUBLESHOOTING pH BUFFERS SPECIFICATIONS WARRANTY	7the user to the next setting.C. LCD screenSTAND SLOPERmVCAL6.86 7.00 ATC MANpH1 2 3 4 51211109876CmA1. Major LCD display.2. CAL – This icon will be displayed if the meter is in the Calibration/Setting mode.3. mA – This icon, when displayed, indicate in the 4 mA or 20mA Setting mode.4. ℃℃℃℃ – Temperature and unit display. Previous Next / 35