SERVICE BULLETIN JBL2000-01 - JANUARY 2000To all JBL Service Centers Warranty labor rate: MINOR repairModel: PSW-D110/DPS-10Subject: Failure of C6In the event you receive a JBL subwoofer corresponding to one of the above models with the complaint “no output” andcapacitor C6 (10uf 50v NPE) is damaged in the amplifier, replace with the following part: JBL part# 30712 (10uf 100v NPE)General reference for location only; not all parts or designators may conform to these drawingsIt is also recommended following the repair that the instructions included in bulletin #JBL9903 are followed.Models Serial number 120/230V Status ActionPSW-D110/DPS-10 All serial numbers affected Replace if damaged Replace C6 with JBL part# 307121 6Amplifier/Subwoofer PSW-D110/DPS-10