JAI EL-2800M-CXP User Manual

Contents

JAI EL-2800M-CXP User Manual Manual pdf 45 page image

EL-2800M-CXP / EL-2800C-CXP- 43 -7.3.4 Trigger DelayThis function delays trigger signal against trigger input signal.The step is 1μs and the range for setting is 16bit, from 0 to 65,535μs.7.4. Normal continuous operation (Timed Exposure Mode/Trigger Mode OFF)This is used for applications which do not require triggering. In this mode, the video signal for theauto-iris lens is available.For the video timing, refer to chapter 6.3.The frame rate of full pixels readout is 54.7 fps for 1X2–2YE output format.Primary settings to use this modeTrigger controlTrigger Mode: OFFTable - 17 Minimum interval of the image(1X–2YE, 8-bit)1X- 2YE outputFULL 2/3 AOI 1/2 AOI 1/4 AOI 1/8 AOI1/2VBinning(Note1)Minimum frame line 744 564 474 339 272 375Note 1) Only for EL-2800M-CXPNote 2) Readout mode in trigger overlap is not available.7.5. Timed mode (EPS)This mode allows a single image frame to be captured with a preset exposure time by using theexternal trigger. Additional settings determine if the trigger pulse can be accepted during theexposure period.The frame rate of full pixels readout is 54.7 fps for 1X2–2YE output format.Primary settings to use this modeExposure mode: TimedTrigger mode: ONFrame Start : ONTable - 18 Minimum interval of the trigger pulse(1X–2YE, 8-bit)1X–2YE outputFULL 2/3 AOI 1/2 AOI 1/4 AOI 1/8 AOI1/2VBinning(Note1)Minimum frame line 745 565 475 340 273 376Note 1) EL-2800M onlyNote 2) This table shows in case of Trigger option being set to Readout. If Triggeroption is set to OFF, this period is longer than the figures in this table.