BM-500GE / BB-500GE93. Main Features Member of C3 Basic camera series 2456 (h) x 2058 (v) 3.45 μm square pixels 2/3 ” progressive scan – Monochrome and Bayer mosaic color versions 15 frames/second with full resolution in continuous operation 15 frames/second with external trigger and full resolution Increased frame rate with vertical binning (BM-500GE only) , and partial scan Exposure time from 64μs to 2 sec. using Pulse Width trigger mode Programmable exposure from 64μs to 66 ms in Full Frame scan GPIO in combination with Pulse width trigger for more precise exposure time Sequencer trigger mode for on-the –fly change of gain, exposure and ROI Edge Pre-select and Pulse width trigger mode One-push or preset Bayer white balance for BB-500GE Look Up Table (LUT) for gamma and knee settings LVAL-synchronous/-asynchronous operation (auto-detect) Auto iris lens video output allows a wider range of light (Can be Selected by DIPswitch) GigE Vision Interface with 12, 10 or 8-bit output Programmable GPIO with opto-isolated inputs and outputs Comprehensive software tools and SDK for Windows XP/Vista ( 32 bit(x86) and 64bit ( x64) ( JAI SDK Ver. 1.2.1 and after )
