Iberital IB7 Installation And Operation Manual

Also see for EXPRESSION PRO: Installation and operation manual

Contents

Iberital IB7 Installation And Operation Manual Manual pdf 68 page image

IBERITALPage 68 INSTALLATION AND OPERATION MANUALENGLISH- New Iberital machines: Press the I/O button and the display will show the boiler temperaturein ºC, the time and the name entered.xxxºC hh:mmUser MENU display: When the coffee machine switch is in position 2 and the display in the ON position (on thescreen the name entered will be shown), press the MENU or TWO COFFEES button on the left button pad(based on the display used) for at least 5 seconds, and enter the user level programming mode.Technical MENU display: When the coffee machine switch is in position 2 and the display in the OFF position (onthe screen the word OFF will be shown), press the MENU or TWO COFFEES button on the left button pad (basedon the display used) for at least 10 seconds, and enter the technical level programming mode.IMPORTANT: Once inside the MENU, pressing on the MENU or NON-STOP button on the left buttonpad (based on the display used) allows you to move through the display functions. Pressing the OK or TWOESPRESSOS button (based on the display used) will confirm the chosen function and confirm the changes.To change between two functions, the UP or ONE ESPRESSO button moves you up an option, and the DOWNor ONE COFFEE button (based on the display used) will drop you down an option. (See image in sections 2.9.1.1and 2.9.1.2.)2.9.3.1.1 User menu display- Programming the TIME and weekly ON/OFF for the machine:When the words SET CLOCK appear, confirm the selection by pressing the OK button. The programming of the timeand day of the week is very important, because this information will be used by the control unit for the weekly ON/OFFactivation of the machine.Set ClockHH.MM.xxxxxxxPress the UP/DOWN buttons to change the HOURS and press OK to confirm and move on to the MINUTES and theday of the week. After confirming the day of the week, it will automatically go into the weekly ON/OFF programmingmode.Auto On/OffAAA:hh.mmPressing the UP/DOWN buttons will vary the HOURS until the desired hour is found, and then you must press theOK button to confirm the selection and move on to the option of MINUTES (mm), carrying out the same operationwhen the word OFF appears and the rest day.IMPORTANT: So that the machine does not come on automatically, enter (--) hyphens in the selection of HOURS(hh.mm) for ON and OFF and the rest day.- Visualization of the counters:CountersIn this section all consumption levels may be read.- Press the OK button and the display will show:HH: HoursMM: Minutesxxxxxxx: Day of the weekAAA: ONOFFhh: On/off hoursmm: On/off minutes