FLEX-BX200-Q370Page 78 Detect Non-Compliance Device [Disabled]Use the Detect Non-Compliance Device option to detect non-compliance PCIe device inPEG. Disabled D EFAULT Do not detect non-compliance PCIe device in PEG Enabled Detect non-compliance PCIe device in PEG4.4.2 PCH-IO ConfigurationUse the PCH-IO Configuration menu (BIOS Menu 24) to configure the PCH parameters.Aptio Setup Utility – Copyright (C) 2018 American Megatrends, Inc.ChipsetPCH-IO ConfigurationAuto Power Button Status [Disable (ATX)]Restore AC Power Loss [Last State]> PCI Express Configuration> SATA And RST Configuration> HD Audio ConfigurationPower Saving Function(ERP) [Disabled]USB Power SW1 [+5V DUAL]USB Power SW2 [+5V DUAL]Select AC power statewhen power is re-appliedafter a power failure.---------------------: Select Screen↑ ↓: Select ItemEnter: Select+/-: Change Opt.F1: General HelpF2: Previous ValuesF3: Optimized DefaultsF4: Save & ExitESC: ExitVersion 2.20.1271. Copyright (C) 2018 American Megatrends, Inc.BIOS Menu 24: PCH-IO Configuration Restore AC Power Loss [Last State]Use the Restore AC Power Loss BIOS option to specify what state the system returns toif there is a sudden loss of power to the system. Power Off The system remains turned off Power On The system turns on Last State D EFAULT The system returns to its previous state. If it was on, itturns itself on. If it was off, it remains off.
