680ES OPERATOR MANUAL51© 2015 ICS®, Blount International Inc. Specifications are subject tochange without notice. REV071315 F/N 577451DeclarationDECLARATION OF CONFORMITYEC- DECLARATION OF CONFORMITYAccording to Directive 2006/42/EC; Annex 2ABlount International Inc.4909 SE International WayPortland Oregon, 97222 USADECLARES THAT THE FOLLOWING PRODUCT(S):Equipment Name: Cut-off machine equipped with diamond saw chainBrand Name: ICSModel Number: 680ESSerial number(s): From manufacturing year 2015’s serial numbers and beyondMEETS OR EXCEEDS THE REQUIREMENTS IN THE FOLLOWING EUROPEAN DIRECTIVE(S) AND/OR STANDARD(S):Machinery Directive 2006/42/ECElectromagnetic Compatibility (EMC) 2004/108/ECRegistration, Evaluation, Authorization and Restriction of Chemicals (REACh) 1907/2006Restriction of Hazardous Substances (RoHS) 2002/95/ECNoise Directive (ODN) 2000/14/EC according to ANNEX V, see technical specificationsEN ISO14982:2009; CISPR12:2007+AMD1:2009CLARIFICATION OF PRODUCT CLASS: The ICS 680GC Gas Saw, using the appropriate genuine ICS Diamond Chain, isdesigned to ONLY cut concrete or designated materials other than wood. The cutting means is by grinding throughthe work piece, using a continuous water supply as a coolant and lubricant. This product is not intended for usewith conventional wood cutting saw chain.Corporate Representative: Manufacturer’s Representative in the EC andauthorized to compile the technical fileMarnix KuypersBlount International-Europe-S.A.John DeHaven Rue Emile Francqui, 5Product Safety & Compliance Manager 1435 Mont-Saint-GuilbertBlount International Inc. Portland Or. 97222 USA BelgiumDate / Place:23JUN2015, Portland OR.