ICP WAFER-5823 User Manual

ICP WAFER-5823 User Manual Manual pdf 23 page image

233.11 LCD Interface Connector (CN19)The WAFER-5823 provides a 2x22-pin connector for the LCDflat panel interface.The WAFER-5823 comes to support TFT LCD panels at followingdisplay options: (This is a reference table only, this board maysupport more other types of panels.)Video DisplayType Resolution ExampleTFT VGA 640x480, 64KColor, 18bits Toshiba LTM10C209ATFT SVGA 800x600, 64KColor, 18bits Toshiba LTM12C275ATFT XVGA1024x768, 64KColor,18bitsNECNL10276AC30-04RThe TTL signal connecting interfaces is located on CN19. Thedisplay options need to be setup manually through BIOS. TheBIOS “Integrated Peripheral” Setup will allow you to choosedisplay resolution either 640x480 or 800x600 or 1024x768.z CN19: LCD Interface Connector – only support up to24 bit LCD. For better display quality, the length ofLCD cable should be shorter than 35 cm.PIN NO. Description PIN NO. Description1 +12V 2 +12V3 GND 4 GND5 +5V 6 +5V7 FPVEE 8 GND9 GND 10 GND11 BLUE0 12 BLUE113 BLUE2 14 BLUE3