I-Inc iH253 User Manual

Contents

I-Inc iH253 User Manual Manual pdf 8 page image

User’s ManualSETTING THE MONITOR ON THE WALLDISSEMBLING THE STAND BASE:1. Disconnect all the cables and cords from the Monitor to prevent breakage.2. Carefully place the Monitor face down on a soft and flat surface (blanket, foam, cloth, etc) toprevent any damage to the Monitor.3. Remove the four (4) screws so that the stand base can be removed.4. Gently remove the stand base.(For reference only)WALL MOUNTING THE MONITOR:1. Purchase a VESA compatible wall bracket:VESA 100X100, 4 holes, M4, 10mm, 8kg.2. Locate your ideal Monitor position on the wall.3. Fix the wall bracket firmly on the wall.4. Secure the Monitor to the bracket using the 4 mountholes on the back and center of the Monitor.Note:• Please read the instructions of your specific wall bracket to properly wall mount the Monitor.• The pitch of the mounting holes is 100mm horizontally and 100mm vertically.• The screws type required is metric: M4, 10mm length.• The Monitor stand base can be screwed on a table or a hard surface using the hole on the back ofthe stand base.*Installing the LCD Monitor requires special skill that should only be performed by qualified servicepersonnel. Customers should not attempt to do the work themselves. I-INC bears no responsibilityfor improper mounting or mounting that results in accident or injury. You can ask a qualified servicepersonnel about using an optional bracket to mount the Monitor to the wall.8