Husqvarna Z242F Operator's Manual

Also see for Z 242F: Operator's manual Operator's manual Operator's manual Operator's manual Operator's manual

MaintenanceDaily maintenance Do maintenanceat a minimum of 1time each yearMaintenance interval in hoursBefore After 25 50 100 300Do a check of the safetysystem. XMake sure that there areno fuel or oil leaks fromthe product.*Make sure that there areno damage on the prod-uct.*Make sure that there areno loose parts. *Do a check for damageson the cutting deck. *Do a check of the cuttingdeck for adjustment. X XDo a check of the tirepressures. X X X X XDo a check of the batteryconnections. X X X X XDo a check of the throttlecable. ODo a check of the casterwheels (each 200 hours). X XDo a check of theclearance of the enginevalve.1* *Clean the air intake of theengine.2 O OClean the bottom side ofthe cutting deck. XClean around the engine. *Clean around the beltsand the belt pulleys. * * * *Do a check of the beltsand the belt pulleys. X XClean the foam pre-filter.3 O OReplace the foam pre-fil-ter.45 O1 Must be done by approved service agent.2 In conditions with dust, cleaning and replacement must be done more frequently.3 In conditions with dust, cleaning and replacement must be done more frequently.4 In conditions with dust, cleaning and replacement must be done more frequently.5 If the product is equipped with the foam pre-filter.2242 - 001 - 11.08.2023 15