Husqvarna S-Line Series Operator's Manual

Also see for S 13: Operator's manual Operator's manual Operating manual Operator's manual Manual

Contents

6. FILTER CHANGERisk of dust dispersion – Use personal safety equipmentUnhealthy dust can be spread during filter change. Accordingly, the user should wear protective glasses,protective gloves, and a breathing mask conforming to protection class FFP3.Wear breathing mask Wear ear protection Wear protective glassesPre-filterLoosen the 3 clamps and remove the top. Take the bag from the new filter.Lift out the filter and place it gently in a plastic bag. This bag must be properly disposed.Insert a new filter.Important:If you are removing the Pre-filter in order to clean it. Hitting the filter with force or use of compressed air willdestroy the filter. It can handle water, but high pressure water cleaning will destroy it.Hepa FilterLoosen the two nuts on each filter cover cap. Carefully lift the filter into a clean plastic bag, use the bag from thenew filter. This bag must be properly disposed. Insert a new filter in reverse order.Important:Hepa filters can’t be cleaned, trying this might destroy it. When installing the replacement filter, make sure tonot touch the inside of the filter. Any kind of force/damage on the inside of filter media will destroy the newfilter.Recommended intervals for filter change: Socks filter every 6 months and Hepa filter every 12 month.7. SERVICE• When cleaning and servicing the machine, you must switch off the machine and remove the plug fromthe outlet.• Avoid cleaning with a high pressure cleaner. If necessary, do not direct at the openings on the machine,especially the opening for cooling air.• Before moving the machine from the work area, the machine must be cleaned.• All other equipment must be regarded as contaminated and be treated thereafter.• If possible, use a special suitable room.• Proper personnel protective equipment must be used. Dust can be spread when the coarse filter and theabsolute filter are replaced that can be hazardous to health. Accordingly, the user should wearprotective glasses, protective gloves, and a breathing mask conforming to protection class FFP3.• All parts which are contaminated after service must be properly disposed of in plastic bags according toall regulations.• If the machine has to be used for other purposes, it is extremely important that the machine is cleaned,to avoid the spread of hazardous dust.• Do not puncture the Hepa filter. Risk of dust dispersion.WARNINGRemember to switch off the machine and pull the plug out of the outlet before servicing.