Husqvarna S 13 Manual

Also see for S 13: Operator's manual Operator's manual Operating manual Operator's manual Operator's manual

• Multi adapter (only S 13/S 26)If 1 of the parts is missing, speak to your local serviceagent or salesman.For models that do not have the front casters assembledbecause of the limit of package:• Assemble the front casters using the bolt or the nutand the washer included in the package.Make sure to dispose the package and the used productcomponents in correct procedure. Refer to local disposalregulations. Make sure to recycle.To attach the suction hoseThere is a hose intake with a hose lock on the product.The hose lock makes sure that the suction hose adapterdo not fall off.1. Lift the hose lock and attach the suction hoseadapter.2. Lower the hose lock into the recess of the adapter.To attach the nozzle on the hand pipeThe floor nozzle has adjustable wheels. Adjust thewheels to get the best suction effect. Adjust the wheelswith the knob, which is on the rear side of the nozzle.The wheels and rubber strips of the nozzle can bereplaced. Keep the nozzle in good condition.OperationIntroductionWARNING: Before you operate the product,carefully read and understand the safetychapter and the operation instructions.Before useWARNING: Before using the dust extractormake sure that the power and voltagecorresponds with the voltage shown on themachines rating plate, including extensioncords.Grounding instructionsWARNING: The dust extractor must begrounded. If it should malfunction orbreakdown, grounding provides a path ofleast resistance for electric current to reducethe risk of electric shock. The dust extractoris equipped with a cord having anequipment-grounding conductor andgrounding plug. The plug must be insertedinto an appropriate outlet that is properlyinstalled and grounded in accordance withall local codes and ordinances.To start and stopUse the switch to start the dust extractor.Start switch Models with au-tomatic startModels withoutautomatic startBlack - 3 step 0: Motor OFFI: Motor ONII: AutomaticstartRed - 2 step 0: Motor OFFI: Motor ONAutomatic start functionWhen you use the dust extractor together with anothermachine, there is an electrical outlet on the dustextractor. Connect the machine to this outlet. Then whenyou start it up the dust extractor will also start afterapproximately 1-2 seconds. When you turn it off, thedust extractor will continue to run for approximately 10seconds to empty the hose and then stop.6