English - 7Safety InstructionsOperator's Manual RC 455The pressure hoses in the system must always beconnected to the tool’s intake. The return hoses in thesystem must always go to the tool's outlet. Confusingthe connections can cause the tool to work in reverse,which can result in personal injury.• Keep the hydraulic couplings clean and free of dirt.• Always switch on the remote control's emergency stopswitch before transporting the equipment.• Check that the hydraulic hoses are not damaged andcannot become damaged during cutting. Leakage canlead to the risk of slipping.• Make sure that there is always another person close athand when you use the machines, so that you can callfor help if an accident should occur.• Do not use machines if they do not function as theyshould.• Do not modify safety equipment. Check regularly thatthey function as they should. The machine must not berun with defective or disassembled safety equipment.• Regulations for the prevention of accidents, and othergeneral safety and occupational health regulations,must always be followed.• Make sure that you always have a first-aid kit close athand when using the machines.• Keep all parts in good working order and ensure thatall fixtures are properly tightened. Replace all worn ordamaged decals.• Store the machines in a locked area, where they areinaccessible to children and adults who have not beentrained to operate the machines.• Pay attention to the risk of fire from sparks and heat. Ifthere are no local fire protection regulations for cuttingor grinding machines, follow the regulations forwelding.WARNING!Always use approved protective clothingand approved protective equipment whenusing the machine. Protective clothing andprotective equipment cannot eliminateaccident risks, but by using the rightclothes and equipment you can reduce theseriousness if an accident should occur.Ask your dealer about approved andrecommended protective clothing andprotective equipment.